CostToRunIt

Electronics & Office · West

Cost to run a gaming console in Utah

At Utah’s average residential rate of 13.31¢ per kWh, a gaming console drawing 150W for 3 hours a day, at a 100% duty cycle, costs about $1.82 per 30.44 use days. Change the numbers below to match how you actually use yours.

Gaming Console electricity cost calculator

Use watts and running time, or enter energy from a label, meter or completed load. Your inputs stay on this device.

Power and running time

Your estimated energy cost

Scheduled hour$0.020
Use day$0.06
30.44 use days$1.82
Annual total$21.86

164 kWh across 365 use days per year

Power mode includes your selected duty cycle. The monthly figure assumes 30.44 use days; the annual total uses your selected use days. These are estimates at the entered rate.

Energy charges only. Fixed utility fees, purchase, installation and maintenance are excluded. See the calculation method and sources.

Reset to Utah example

Why the cost differs in Utah

Utah has the 4th cheapest residential electricity of the 50 US states and Washington, DC we track, at 13.31¢ per kWh against a national average of 18.16¢. That is -26.7% compared with the national figure. Utah keeps rates low on coal and natural gas generation with compact, low-cost distribution serving a concentrated population along the Wasatch Front. Retail service is regulated. Dry heat makes summer cooling less demanding per degree than in humid states, while cold winters at altitude drive real heating load.

For this appliance specifically, the difference works out to a saving of $7.97 a year against what the same gaming console would cost at the national average rate. Run the identical appliance in Hawaii and it would cost $77.49 a year; in Nevada it would cost $20.89. That spread of $56.60 is entirely down to location.

Reducing use by 100 kWh would save $13.31 in energy charges at Utah's average rate, compared with $18.16 at the US average. Whether a replacement appliance pays for itself also depends on its purchase price and the energy it actually saves.

Use the energy and delivery price that applies to your own utility plan in Utah. If your plan has time-of-use prices, calculate each period separately or use a rate weighted by the electricity used in each period. Fixed monthly fees are outside this appliance energy-cost estimate.

Annual cost of this gaming console at different rates
LocationRatePer monthPer year
Utah this page 13.31¢ $1.82 $21.86
US average 18.16¢ $2.49 $29.83
Nevada cheapest state 12.72¢ $1.74 $20.89
Hawaii most expensive 47.18¢ $6.46 $77.49

Utah electricity rate trend

Rates in Utah have moved from 14.03¢ to 13.31¢ per kWh between September 2025 and August 2026. The national residential average changed +3.4% from the same month a year earlier.

2025-09 to 2026-08 · cents per kWh

About running a gaming console

Current-generation consoles draw 90 to 200 watts while gaming. Rest mode is the thing to check - some configurations draw 10 to 15 watts continuously to enable background downloads.

How we worked this out

The arithmetic is simple and we would rather show it than hide it. Divide watts by 1,000 to get kilowatts, multiply by hours of use and by the duty cycle to get kilowatt-hours, then multiply by your rate:

150W ÷ 1000 × 3h = 0.450 kWh/day × 13.31¢ = $0.060 per day

One honest caveat: Utah’s figure is a state average published by the EIA. Your own utility’s tariff, any time-of-use pricing, fixed monthly service charges and local taxes all shift the real number. Put your actual per-kWh rate into the calculator above for a figure that reflects your bill.

How to estimate your gaming console electricity use

Console electricity changes between playing a game, streaming video, downloading in rest mode and being off. The model and power settings matter, so use representative inputs for each task rather than one maximum rating all day.

Example power is not a specification for a particular console. Hardware, games, subscriptions and internet service are separate from electricity.

  • Estimate gaming energy from average wall watts during the games you play and the time spent playing. Menu or video-playback draw may not represent gaming draw.
  • Calculate rest-mode and off-mode energy separately for the remaining hours. Updates and controller charging can affect what a measurement includes.
  • For an illustrative 150W average wall draw over three hours, energy is 0.45 kWh and cost is $0.09 at $0.20/kWh.
  • Add the TV, monitor and sound equipment only when they are excluded from the console measurement.

Calculation and data sources

Daily kWh = watts ÷ 1,000 × hours × duty cycle ÷ 100. Multiply kWh by your rate in dollars per kWh to get cost. The wattage, hours and duty cycle above are editable example assumptions, not EIA measurements of this appliance.

The US and state average prices come from the EIA for August 2026. A state average is a starting point; your bill is the better source for your tariff.

Questions about gaming console running costs

How much electricity does a gaming console use?

In this example, 150 watts at a 100% duty cycle uses 0.150 kWh per scheduled hour. At 3.00 hours per day, that is 0.450 kWh per use day. Your model and operating conditions can differ.

How much does it cost to run a gaming console for an hour?

The default example costs $0.020 per scheduled hour at the Utah average of 13.31¢/kWh for August 2026. This includes the selected duty cycle. Enter your watts, duty cycle and electricity price for your own estimate.

Does the annual cost assume I use it every day?

The reference tables use 365 days at the stated daily hours; monthly figures use 30.44 days. These are comparison scenarios, not forecasts. For a heater used on 90 days, enter 90 use days per year in the calculator.

Why does electricity running cost vary by state?

For August 2026, the EIA state averages range from 12.72¢/kWh in Nevada to 47.18¢/kWh in Hawaii. Equal electricity use costs more at a higher rate. Your utility tariff can differ from the state average.

Does rest mode use the same electricity as gaming?

No. These are different operating modes. Use model-specific information or measurements for each, including any network activity or charging that occurs in rest mode.

Does this include the TV used with a console?

Only if your input measurement already includes it. Otherwise estimate the display separately and add its energy to the console total.

How do I estimate the electricity cost of a gaming session?

Multiply average wall kW during play by session hours and by your price per kWh. Add other equipment only if it is outside that wall measurement.