Laundry · South
Cost to run a clothes iron in Alabama
At Alabama’s average residential rate of 16.33¢ per kWh, a clothes iron drawing 1100W for 0.5 hours a day, at a 50% duty cycle, costs about $1.37 per 30.44 use days. Change the numbers below to match how you actually use yours.
Clothes Iron electricity cost calculator
Use watts and running time, or enter energy from a label, meter or completed load. Your inputs stay on this device.
Enter a number within each field’s limits to calculate your cost.
Your estimated energy cost
100 kWh across 365 use days per year
Power mode includes your selected duty cycle. The monthly figure assumes 30.44 use days; the annual total uses your selected use days. These are estimates at the entered rate.
Energy charges only. Fixed utility fees, purchase, installation and maintenance are excluded. See the calculation method and sources.
Why the cost differs in Alabama
Alabama has the 26th cheapest residential electricity of the 50 US states and Washington, DC we track, at 16.33¢ per kWh against a national average of 18.16¢. That is -10.1% compared with the national figure. Alabama's retail market is regulated, with Alabama Power serving most households, so the rate you pay is set through state rate cases rather than by shopping between suppliers. Generation leans on natural gas and nuclear. The dominant load pattern is summer cooling: humidity keeps air conditioners cycling well into the evening, which lifts the months from June to September far above the winter baseline.
For this appliance specifically, the difference works out to a saving of $1.84 a year against what the same clothes iron would cost at the national average rate. Run the identical appliance in Hawaii and it would cost $47.36 a year; in Nevada it would cost $12.77. That spread of $34.59 is entirely down to location.
Reducing use by 100 kWh would save $16.33 in energy charges at Alabama's average rate, compared with $18.16 at the US average. Whether a replacement appliance pays for itself also depends on its purchase price and the energy it actually saves.
Use the energy and delivery price that applies to your own utility plan in Alabama. If your plan has time-of-use prices, calculate each period separately or use a rate weighted by the electricity used in each period. Fixed monthly fees are outside this appliance energy-cost estimate.
| Location | Rate | Per month | Per year |
|---|---|---|---|
| Alabama this page | 16.33¢ | $1.37 | $16.39 |
| US average | 18.16¢ | $1.52 | $18.23 |
| Nevada cheapest state | 12.72¢ | $1.06 | $12.77 |
| Hawaii most expensive | 47.18¢ | $3.95 | $47.36 |
Alabama electricity rate trend
Rates in Alabama have moved from 16.40¢ to 16.33¢ per kWh between September 2025 and August 2026. The national residential average changed +3.4% from the same month a year earlier.
2025-09 to 2026-08 · cents per kWh
About running a clothes iron
High wattage but thermostatically cycled and briefly used, so the real cost is minimal - typically a few dollars a year even for regular use. The thermostat means a 1,800W iron does not draw 1,800W continuously; it pulses to hold the setpoint.
How we worked this out
The arithmetic is simple and we would rather show it than hide it. Divide watts by 1,000 to get kilowatts, multiply by hours of use and by the duty cycle to get kilowatt-hours, then multiply by your rate:
1100W ÷ 1000 × 0.5h × 50% = 0.275 kWh/day × 16.33¢ = $0.045 per day
One honest caveat: Alabama’s figure is a state average published by the EIA. Your own utility’s tariff, any time-of-use pricing, fixed monthly service charges and local taxes all shift the real number. Put your actual per-kWh rate into the calculator above for a figure that reflects your bill.
How to estimate your clothes iron electricity use
Estimate the electricity used by your clothes iron from its electrical input and operating time. The preset is an example for this appliance class; model, settings and your electricity price can change the result.
A preset is not a measurement of your model. Variable power, standby use and different operating modes may need separate estimates. The source below supplies electricity-price data, not the appliance wattage.
- Use electrical input watts from your model documentation or a suitable measurement. Rated maximum power may be higher than normal operating draw.
- If you enter average measured watts over the whole period, set duty cycle to 100%. If you enter active running watts, use the fraction of time spent at that draw.
- In watts-and-hours mode, monthly output is a 30.44-day equivalent at your daily settings. Reduce annual-use days for equipment used seasonally or only on certain days.
- For measured consumption, cost equals kWh multiplied by your usage-based price per kWh. This excludes purchase, installation and maintenance costs.
Calculation and data sources
Daily kWh = watts ÷ 1,000 × hours × duty cycle ÷ 100. Multiply kWh by your rate in dollars per kWh to get cost. The wattage, hours and duty cycle above are editable example assumptions, not EIA measurements of this appliance.
The US and state average prices come from the EIA for August 2026. A state average is a starting point; your bill is the better source for your tariff.
Questions about clothes iron running costs
How much electricity does a clothes iron use?
In this example, 1100 watts at a 50% duty cycle uses 0.550 kWh per scheduled hour. At 0.50 hours per day, that is 0.275 kWh per use day. Your model and operating conditions can differ.
How much does it cost to run a clothes iron for an hour?
The default example costs $0.090 per scheduled hour at the Alabama average of 16.33¢/kWh for August 2026. This includes the selected duty cycle. Enter your watts, duty cycle and electricity price for your own estimate.
Does the annual cost assume I use it every day?
The reference tables use 365 days at the stated daily hours; monthly figures use 30.44 days. These are comparison scenarios, not forecasts. For a heater used on 90 days, enter 90 use days per year in the calculator.
Why does electricity running cost vary by state?
For August 2026, the EIA state averages range from 12.72¢/kWh in Nevada to 47.18¢/kWh in Hawaii. Equal electricity use costs more at a higher rate. Your utility tariff can differ from the state average.
Should I enter rated watts or average watts?
Use the input that matches your measurement. Rated watts can represent maximum draw. If you know the average watts over the selected hours, enter that average and set duty cycle to 100%; do not reduce it again for cycling.
Does this include the purchase price?
No. This calculator estimates electricity at the entered usage-based rate. Purchase, installation, maintenance and fixed monthly utility charges are separate.
How do I estimate occasional use?
In watts-and-hours mode, enter the hours used on an active day, then select the number of use-days per year. The monthly figure remains a 30.44-day equivalent at that daily use; the annual figure uses your selected days.